高功率半導體激光器
高功率半導體激光器
High Power Diode Laser Systems DioLas
(DioLas DD50-2 with diode module DioMod–808-50-600-Pi and heat sink HS 120)
DioLas-Systems consist of:
The combined high power laser driver and TEC controller of A.L.S. – a high performance driver for high power diode laser modules, optimized for the best performance in industrial applications and for the use in research and development laboratories. It delivers an output current up to 50 A and a voltage up to 3 or 6 V and is designed for cw and pulsed operation with a rise time of 100 µs. It already includes the thermo-electrical temperature controller for active temperature stabilization and regulation of the used diode laser module.
The air forced high power laser diode heat sink of A.L.S., designed for heat loads up to 120, 80, 60 or 40 Watt (depending from the needed heat load for the used diode laser module). The heat sink includes the metal block, a temperature sensor, the Peltier cooling element (TEC) and a fan for the heat dissipation.
The diode laser module. For most of the pigtailed modules a visible (red) pilot (aiming) diode laser can be included in the diode laser module.
Features
laser diode modules with output power up to 50 W for the fiber coupled versions
laser diode modules with currents up to 50 A
microprocessor controlled
temperature controlled
different cases and housings possible
fiber coupled systems with low diameter and low NA (0.22) fibers
(Core diameter 100 µm, 200 µm, 400 µm, 600 µm, 800 µm, …)
user-friendly and reliable systems
Applications
material processing and micro material processing,
stabilized pump sources for diode pumped solid state lasers or fiber lasers
sources for illumination and lightning
research and development
OEM versions for test systems for laser diode module parameters (lifetime, burn in)
Two different systems are available:
30 W cw/pulsed Systems (prepared for fiber coupling 400 µm, 600 µm, …)
@ 808 nm
@ 940 nm
@ 980 nm
50 W cw/pulsed Systems (prepared for fiber coupling 400 µm, 600 µm, …)
@ 808 nm
@ 940 nm
@ 980 nm
The high power laser diode system will be assembled and measured out corresponding to the special application of the customer. Of course the customer can buy also the driver and the needed laser diode heat sink and use his own diode laser module to assemble his own system.
【激光系列產品】
光纖激光器 多模泵浦激光器 激光二極管未封裝bar 激光二極管冷卻裝置 激光器電源 氦氖激光器 CO2激光器 半導體泵浦激光器 氬離子激光器 氦鎘激光器 氮分子激光器 皮秒激光器 激光二極管電源 激光光譜測量 激光能量計/功率計 激光雕刻、打標、切割機 激光二極管模塊 深紫外、紫外固體激光器 信號發生器 超快飛秒激光器 熱電制冷產品 激光光束定位系統 激光光束分析儀 視頻顯微鏡測量系統 激光準直器 多通道激光功率計 半導體激光器 激光測距儀 紅外激光顯示卡 調Q激光器 激光護目鏡 光學平臺 光學調整架 光學微調架 可調嵌入式光學調整架 傾斜位移臺 通用調整臺 光學延遲線 手動位移臺 XY位移臺 光學旋轉臺 角位移調整臺 激光器附件 可變光闌 擴束鏡 拉曼激光器 大功率光纖耦合激光器
