DZ47 MV+MN DZ47 MV+MN   DZ47 MV+MN DZ47 MV+MN   DZ47 MV+MN DZ47 MV+MN   DZ47 MV+MN DZ47 MV+MN   DZ47 MV+MN DZ47 MV+MN

MN欠壓脫扣器、MV過壓脫扣器、MN+MV過欠壓脫扣器

一、適用范圍

本系列斷路器電氣附件是我公司專為(DZ47)-63、(DZ47)-100系列斷路器配套設計的輔助功能元件，在電氣等線路或家居、建筑中，可以根據需要選擇不同的電氣附件與(DZ47)-63、(DZ47)-100系列斷路器配合，以實現斷路器線路的欠壓、過壓、過欠壓保護等功能。    

二、附件的名稱、用途及符合標準

(DZ47)-63、(DZ47)-100系列斷路器附件的名稱、用途及符合標準見表1。

附件名稱	代 號	用       途	符合標準
欠壓脫扣器	(MN)	當電源電壓下降在（0.35～0.75）Ue之間時，使斷路器脫扣，實現線路的欠電壓保護。	IEC60947-2：1999、GB14048.2-2001
過壓脫扣器	(MV)	當電源電壓上升到270±5%時，使斷路器脫扣，實現線路的過電壓保護。	IEC60947-2：1999、GB14048.2-2001
過、欠壓脫扣器	(MN+MV)	當220V額定電源電壓上升到270±5%或下降在170±7V時，使斷路器脫扣，實現線路保護。	IEC60947-2：1999、GB14048.2-2001

三、主要技術參數過壓、欠壓、過欠壓脫扣器，欠壓保護器技術參數（見表2）

附件名稱	額定工作電壓Ue	動作電壓
過壓脫扣器	AC：Un=230V（過壓）	270 V±5%
欠壓脫扣器	AC：Un=230V（欠壓）	170 V±5%
過、欠壓脫扣器	AC：Un=230V（過、欠壓）	過壓：2705±5%V 欠壓：170±7V

安裝方式所有電氣附件都加掛在斷路器的側面

注：在斷路器左側拼接的附件可以多個，在斷路器右側拼接的附件只能1個件與安裝條件環境溫度：-5℃～+40℃；海拔高度：不超過2000m；環境條件：應無會引起爆炸危險的介質，也無會腐蝕和破壞絕緣的有害氣體和導電塵埃；安裝條件：采用35mm標準卡軌安裝。

聯系我們：0577-27882728     15888434243   QQ：149845663

MN undervoltage tripping device, MV overvoltage tripping device, MN+MV undervoltage tripper

One, applicable scope

The series circuit breaker electrical accessories are specially designed for the ( DZ47 ) -63, ( DZ47 ) -100 series circuit breaker supporting design of auxiliary function element, in the electrical circuit or home furnishing, buildings, can be chosen according to the different needs of the electrical accessories and ( DZ47 ) -63, ( DZ47 ) -100 series circuit breaker with, to circuit breaker circuit, overvoltage, undervoltage overvoltage and undervoltage protection function.

In two, the name of the attachment, use and standard of

( DZ47 ) -63, ( DZ47 ) -100 series circuit breaker accessories name, purpose and standard of table 1.

Attachment name code uses standard

Undervoltage tripping device ( MN ) when the supply voltage drops in ( 0.35 ~ 0.75 ) Ue between, make the circuit breaker tripping, realizes line undervoltage protection. IEC60947-2:1999, GB14048.2-2001

Overvoltage tripping device ( MV ) when the supply voltage is increased to 270±5%, make the circuit breaker tripping, realize line overvoltage protection. IEC60947-2:1999, GB14048.2-2001

Too, undervoltage tripping device ( MN+MV ) when 220V rated supply voltage rises to 270± 5% or 170±7V, drop in, the circuit breaker tripping, realization of line protection. IEC60947-2:1999, GB14048.2-2001

In three, the main technical parameters of overvoltage, under voltage, overvoltage and undervoltage tripper, under-voltage protection device technical parameters ( see Table 2 )

Attachment of rated voltage Ue operation voltage

Overvoltage tripping device AC:Un=230V ( OV) 270 V± 5%

Undervoltage tripping device AC:Un=230V ( 170 V ± 5% under-voltage )

Too, undervoltage tripping device AC:Un=230V (, undervoltage overvoltage ): 2705 ± 5%V under pressure: 170 ± 7V

Install all electrical accessories are coupled on the side of circuit breaker

Note: in circuit breaker left splicing attachment can be more than one, in the right of breaker splicing attachment of only 1 and the mounting conditions of the environment temperature: -5 ℃~ +40 ℃; altitude: not more than 2000m; environmental conditions : there should be no cause explosive medium, nor can corrupt and broken insulation harmful gas and electric dust; installation conditions: using the standard 35mm card track installation.